• designed with economy in mind without compromising quality
• steel slide and base, guideways hardened and ground
• compact design
• high precision
• quick adjustment with socket pin
• comprehensive accessories

Hilma KNC machine vice mechanical-hydraulic

• maximum precision at full clamping force 
• power transmission and spindle drive are integrated into the slide body. They are fully emcapsulated.
• achievable clamping ranges 0-436 mm in connection with reversible step jaws
• high precision (KNC 160)
• lock for purely mechanical clamping, e.g. delicate workpieces
• comprehensive accessories including clamping force selection and angular drive 

Hilma NC machine vice mechanical-hydraulic & hydraulic

• keyways in longitudinal direction and across the length for quick and precise positioning 
• keyways and threaded holes on slide and fixed jaw for the extension of the clamping range with step jaws inserts
• rapid and safe fastening using clamping jaws
• comprehensive accessories

     additional features -     hydraulic

• extremely short clamp and unclamp cycles
• manually adjustable gap using lead screw for workpiece placement
• hydraulic stroke between 5 and 7 mm
• semi or fully automatic operation using hydraulics
• clamping force can be monitored and interlocked with machine

Hilma MC 5-axis machine clamping system - mechanical & hydraulic

• jaw widths 40, 60, 100 and 125 mm 
• optimisation features for the  use on 5-axis machines
• free access to the workpiece, therefore use of standard short tools
• simple and robust construction, smooth surfaces, easy cleaning
• comprehensive jaw program

• mechanical zero point clamping system allows the set-up of different devices in a few seconds
• rapid, precise change of clamping elements 
• simple robust design 
• no external power supply required

• jaw widths 80 and 120 mm 
• optimisation features for unopposed multiple side machining
• high degree of freedom for spindle and tools, low risk of collision
• suitable for use with short standard tools 
• repeatable and controllable clamping forces of up to 25 kN (SCS 80) and 40 kN (SCS 120)
• jaw with a special grip for maximum holding force (factor 3 as compared with standard jaw)
• large range of accessories
• designed with economy in mind without comprimising quality

Hilma DUO/CS/DCS compact clamping system - mechanical & hydraulic

     Duo

• mechanically operated 
• compact design 
• rapid, customer friendly double clamping
• one-sided working of the spindle
• simple adaptation of clamping jaws
• precise adjustable clamping force 

     CS & DCS

• mechanically operated with power amplifier or hydraulically operated
• compact design
• rapid and easy clamping and unclamping by a short lever movement
• automatic clamping and unclamping with hydraulic version
• simple adaptation of standard and special jaws
• rapid jaw change
• staggered jaw widths between 25 to 80 mm
• precisely adjustable and exactly reproducible claming forces
• suited for use with zero point clamping systems
• can be installed in any position

     additional features -     DCS

• clamping points work independently from each other

Hilma DF flexible double clamping system - mechanical-hydraulic & hydraulic

• double clamping system for single row and row clamping
• used for clamping workpiece of equal or different size
• mechanical and hydraulic operated versions
• suitable for holding two different workpieces that can be machined in one operation
• positioning and fastening in keyways across the length or in grid holes respectively
• individual adjustment of both clamping points
• clamping force compensation allowing constant zero point of the central jaw
• central jaw may be installed in the end position to increase clamping range for larger components

Hilma DS double clamping system mechanical & hydraulic

• double clamping system for single and row clamping
• used for clamping workpieces of equal or different size 
• mechanical and hydraulic operated versions
• easy adjustment of clamping range using 3rd hand function
• safe loading and unloading using 3rd hand function
• floating central jaw for DS 125, accommodating up to 4 workpieces
• well protected spindle area, no uncovered apertures 

• mechanical-hydraulic and hydraulically operated 
• customer-specific design of the clamping elements to suit working areas, travelling distances, clamping surfaces and machining tasks
• easy selection from a range of standard designs 
• base is available in at least two alternatative lengths for each size
• using appropriate parameters, the system can be used for horizontal and veritcal applications
• adaptation to special clamping tasks using special or standard jaws 

• mechanical-hydraulic operated 
• suitable for a least four eqaul or different workpieces
• ideal for small batch production on horizontal machining centres
• multiple clamping ensures extended pallet cycles, one operator can serve several machines 
• reduction of non-productive times, increase of productive times
• three sided machining of all workpieces in one clamping application
• extremely robust design
• highest precision machine vice

• mechanical-hydraulic operated 
• suitable for a least sixteen eqaul or different workpieces
• when using floating central jaws, up to sixteen workpieces can be loaded 
• safe manual clamping without need for power source
• up to 40 kN per clamping point on the TS 125
• precisely adjustable clamping forces 
• the spindle area is fully protected and the slide and guideways are free from play
• rapid changeover increases productive time
• multiple clamping ensures extended pallet cycles
• high workpiece density avoids unessential traverse paths from workpiece to workpiece

Hilma MSH modular multiple clamping system - mechanical

• multiple tri-fold clamping system 'premium, easy clamp and goliath' 
• precise functional connection between base and clamping modules achieved by fine teeth and a patented eccentric locking system using only one fixing screw
• rapid set-up without measuring instuments using the scale on the base module and graduation marks on the fixed and clamping module
• fixed and clamping module available in in various widths 
• clamping modules with a rear contact surface accurate in size
•   workpieces need not be accommodated in "mirror image"
• accommodation of a maximum number of workpieces
• extension to the base modules is possible
• exact and repeatable workpiece positioning
• zero point adjustment using the machine spindle is not necessary 
   

     Premium

• all faces ground
• tolerance +/-0,01 mm
• all system parts hardened and rust-resistant
• clamping modules with retaining guide
• scale on both sides
  
   

     Easy clamp

• all surfaces fine milled and surface hardened
• tolerance +/- 0,03 mm
• scale one-sided
• eccentric spindle with hexagon socket
   

     goliath

• clamping forces up to 40 kN per unit
• additional power retaining with link blocks
• used for heavy-duty machining
   

•  hydraulically operated self-centering machine vice
• centric clamping of cubic and cylindrical workpieces
• high clamping repeatability +/-0,01 mm
• large clamping ranges
• any mounting position
• customer specific jaws
• protection against coolant   and swarf by integral wipers built in to
• clamping slides
• available with opening stroke limitation using proximity switch or set-screw
• guide ways can be lubricated using lubrication system

Hilma Standard machine vice jaw accessories

• pre-machined workpieces can be clamped using standard jaws
• interchangeable jaws with different functions extend the range of applications
• different jaws allow efficient positioning and clamping of simple and complicated workpieces
• costly fixtures dedicated to single workpieces can be avoided

     standard jaws include:

• step jaw insert
• precision step jaw
• pendulum jaw
• vee jaw
• clamping jaw, soft
• clamping jaw, extra high
• clamping jaw, extra large

Hilma SMV floating central jaw system for multiple clamping

• floating jaws for multiple clamping maximises the machining working area
• floating jaws reduce tool change and cutter travel which contributes to a significant reduction in the cost of manufacture
• lower grip prevents workpieces from rearing up
• results in longer machine up time
• all workpieces are clamped with the same clamping force
• floating jaws allow optimum utilization of the working area by dense workpiece arrangement

Hilma QIS quick insert jaw system

• quick insert system with down thrust effect
• base jaws are fastened to the slide and to the fixed jaw using screws
• jaw inserts may be inserted and removed swiftly
• jaws insets are kept in place by two permanent magnets
• down-thrust effect ensures constant reference points leading to high quality of the workpiece
• soft inserts for customer's own adaptation to specific workpieces extend the range of applications
• reduction of non-productive time
• suitable for use with all Hilma clamping systems (jaw widths 100-160 mm)
  
   

Hilma Slimflex jaw system allowing three side machining

• The SlimFlex jaw system allows 3-side machining of centrally clamped workpieces with dimensions less than the jaw width of the clamping device
• Retaining pieces keep the workpiece off the base jaw, which provides optimum access from three sides for the work spindle
• even small workpieces can be centrally clamped for 3-side machining
• rapid, infinitely variable positioning with the help of the scale, quick and simple clamping
• elastic pressure pads prevent dirt accumulation between the retaining pieces and the base jaws
•  the number of time-consuming clamping operations can be considerably reduced, the system will repay for itself in a very short time
  
   

Hilma System Bock TV double clamping system mecahnical with fully machinable aluminium jaws

• Double clamping systems with aluminium jaws
• Fully machinable jaws
• Ideal for clamping workpieces with complex clamping and contact contours
• Aluminium jaws, suitable for complete milling out, both sides may be used
• The aluminium base with hardened steel guides results in a low dead weight
• Jaw change in a few seconds, downthrust effect in the movables jaws
   

Hilma System Bock TMQS tower clamping system mechanical with fully machinable aluminium jaws

• Positioning and clamping of up to 8 workpieces
• For clamping workpieces with complex clamping and contact contours
• Aluminium jaws, suitable for complete milling out, both sides may be used
• The aluminium base with hardened steel guides results in a low dead weight
• Jaw change in a few seconds, downthrust effect in the movables jaws

Hilma Bock hexagonal tower clamping system mechanical with fully machinable aluminium jaws

• MQS special solutions provide all the advantages of the TV/MQS standard clamping system
• Hexagon tower clamping systems can accommodating up to 12 workpieces, therefore long running time of the pallet
•  Under special conditions the three-side-machining of the workpieces is possible
• Triple tower clamping systems can accommodating up to 6 workpieces
• Triple tower clamping systems enables three-side machining to a limited extent
  all towers can be modified for the use with reversible and rotary clamping devices (4th axis)