A return line filter, especially suitable for use with manifold equipped GX20, GX30 and GX40 series pumps. The filter screws into the return port (G1/2”BSPT) on the bottom face of the pump flange. It is only suitable for use with R1, R2 and 10 litre capacity reservoirs.

• Filtration level: 20 micron (nominal)
• Filter material: Paper(Wire supported)
• Fluid compatibility: Mineral & lubricating oils only
• Temperature range: -10 to + 100°C
• Pressure drop: 0.06 bar at 30lpm

For more information please visit: Heypac