Your basket is empty.
Browse & Search Products

Linear ball bearings with plastic cage, closed

Description:
Material:
Outer cover, roller bearing steel.
Plastic cage.
Balls, steel.
Note:
The linear ball bearings correspond to series 3 of ISO 10285. With double-sided seal. The linear ball bearings are equipped with a plastic cage. This makes for an quiet run and outstanding run quality. In the case of application temperatures above +80 °C, linear ball bearings with steel cage are recommended. The linear ball bearing is held in place by a retaining ring acc. to DIN 471/472.

Recommended tolerances:
Shaft: h6
Housing: H7

Linear ball bearings with double-sided seal should be lubricated before installation.

The specified basic load ratings apply upon insertion of hardened and ground shafts.
Temperature range:
-20 °C up to +80 °C.


Downloads:21500.pdf

Product Selection

NameOrder No.PriceOrderDD1D2LL1L2Dynamic base loads NStatic base loads NApprox. weight kgSurface finishPriceOrder
unknown21500-1202£16.78
12222132 -0,222,9 -0,21,35208000,040closed£16.78
unknown21500-1602£20.30
162624,936 -0,224,9 -0,21,35909100,060closed£20.30
unknown21500-2002£24.41
203230,345 -0,231,5 -0,21,688014000,090closed£24.41
unknown21500-2502£32.07
254037,558 -0,344,1 -0,31,85100016000,210closed£32.07
unknown21500-3002£39.69
304744,568 -0,352,1 -0,31,85160028000,320closed£39.69

Technical Drawing

Request Information

If you would like to know more about this, or any of our products, please complete the form below or call on 01455 611116

Related Products

Unit 11 Sketchley Meadows, Sketchley Meadows Industrial Estate, Hinckley, Leicestershire, LE10 3EN