Spindle, steel 1.1213;
nut, steel 1.3505;
Spindle, rolled, inductively hardened to 62 ±2 HRC and polished;
nut, ground, track inductively hardened to 62 ±2 HRC and polished
(Please indicate total length L)
For processing the ends, a detailed customer design is required.
Ball-type linear drive with gothic pointed arch profile with 5 mm or 10 mm pitch. Single-start, ascending to the right. Ball screw-flange nut according to DIN 69051 Part 5 with flange.
Manufactured according to accuracy class C7 (tolerance ±50 µ / 300 mm). Without pre-stressing, with axial play P0 (max. 0.08 mm)
We manufacture ball screws at your request on the basis of a detailed design.
Max. production lengths 5600 mm.
Other accuracy classes and pre-stressings available (see Technical Information).
The flange nut must not be removed without assembly aid of the spindle, otherwise the balls fall out.