Your basket is empty.
Browse & Search Products

Machine feet, form B

Description:
Material, surface finish:
Metal parts, galvanized steel, strength 5.6. Elastomer, natural rubber, average hardness, 60° Shore.
Note:
Machine feet are proven, universally usable elements for elastically supporting machines of every type. Wherever large horizontal movements are to be avoided, machine feet are commonly used. Their horizontal rigidity is higher in all directions than their vertical rigidity. If properly used, they provide excellent prevention against the conduction of shocks and noise.

Especially for situations in which tensile forces are to be expected (e.g., in shipbuilding), machine feet with breakaway protection are recommended.

The indicated load data are standard values for a static long-term load with a rubber hardness of 60° Shore A.
On request:
Machine feet with a rubber hardness of 40° or 70° Shore A.

Product Selection

NameOrder No.PriceOrderADD1D2F1 (N)FormHLApprox. weight kgSurface finishCustoms tariff numberPriceOrder
unknown27760-150060£46.08
132150M1612,58000B511681,950without tear protection40169991£46.08
unknown27760-150160£61.72
132150M1612,58000B511682,124with tear protection40169991£61.72

Technical Drawing

Request Information

If you would like to know more about this, or any of our products, please complete the form below or call on 01455 611116

Related Products

Unit 11 Sketchley Meadows, Sketchley Meadows Industrial Estate, Hinckley, Leicestershire, LE10 3EN