Your basket is empty.
Browse & Search Products

Linear ball bearings with angle error adjustment, high basic load rating, closed

Housing, plastic
Press plates, roller bearing steel.
Balls, steel.
The linear ball bearings correspond to series 3 of ISO 10285. With double-sided double-lip seal. These bearings excel in comparison with a standard linear ball bearing owing to the double load-carrying capacity or eightfold travel life. By means of the angle error adjustment, misalignments of housing drill holes or shaft bowing under load are adjusted, the load distribution optimised and the uniform load of all the balls across the entire bearing length assured. The linear ball bearing is held in place by a retaining ring acc. to DIN 471/472.

Recommended tolerances:
Shaft: h6
Housing: H7

Linear ball bearings with double-sided seal should be lubricated before installation.

The specified basic load ratings apply upon insertion of hardened and ground shafts.
Temperature range:
-20 C up to +80 C.


Product Selection

NameOrder No.PriceOrderDD1D2LL1L2Dynamic base loads NStatic base loads NApprox. weight kgSurface finishPriceOrder
12222132 -0,222,6 -0,21,37508250,023closed£35.57
162624,936 -0,224,6 -0,21,3220024000,030closed£44.91
203230,345 -0,231,2 -0,21,6400044000,066closed£51.83
254037,558 -0,343,7 -0,31,85670073000,133closed£65.86
304744,568 -0,351,7 -0,31,85830091000,202closed£77.58

Technical Drawing

Request Information

If you would like to know more about this, or any of our products, please complete the form below or call on 01455 611116

Related Products

Unit 11 Sketchley Meadows, Sketchley Meadows Industrial Estate, Hinckley, Leicestershire, LE10 3EN