Your basket is empty.
Browse & Search Products

Oldham-type couplings clamping with grub screw

Material, surface finish:
Spacer polyacetal, hub in aluminium
Sample order:
nlm 23032-0016,
D1 = 4
D2 = 4
(The hubs are supplied predrilled).
The clamping of the hub by means of a grub screw is a cost-effective alternative for the Oldham-Type Couplings with radial clamping hub (23030). Short assembly times due to the clamping hub with grub screws.
The couplings can be mounted in complete assembled condition resp. a plug-in assembly is also possible. The neccessary thightening torque of the grub screw must be noted. For easy disassembling we recommend to fit out the shaft with a face surface.
The seat shaft / hub is to be selected as transitional seat. Admissible seat clearance shaft / hub: min. 0.01 mm; max. 0.04 mm. E.g.
shaft: 6 f7
hub: 6 H8.
- robust
- plug-in
- backlash-free
- short design
On request:
Desired hub holes D1 and D2 seperately with tolerance class or tolerance zone.


Product Selection

NameOrder No.PriceOrderD4LL1L3SizeNominal torque NmMoment of inertia (10⁻³ kgm²)Static resistance to torsion Nm/arcminMax. angular shaft displacementMax. lateral shaft displacementTightening torque of screws (Nm)D1/D2 predrilledD1/D2 max.Revolutions per minute max.Approx. weight gD1/D2 min.C (DIN 916)PriceOrder
COUPLINGSIZE 2, REAM D1+D2=523032-0016£48.55
COUPLINGSIZE 4,5, REAM D1+D2=823032-0032£84.63

Technical Drawing

Request Information

If you would like to know more about this, or any of our products, please complete the form below or call on 01455 611116

Related Products

Unit 11 Sketchley Meadows, Sketchley Meadows Industrial Estate, Hinckley, Leicestershire, LE10 3EN